Be Mine Gift Wrap Design

Sharing is caring!

I always wanted to decorate a gift with stick-on foam hearts for a fun and easy to create design. They remind me of conversation hearts candy. These Valentine’s Day gifts could be given to anyone a friend, a child, or even a teacher because they are more charming than romantic.

Valentine’s Day Gifts Tall Box

Difficulty – Easy

This design is best suited for a tall box

Materials

• White wrapping paper
• Pink sponged craft or scrapbooking paper
• Multi-colored glossy raffia (white, pink and red)
• 12 small foam heart stickers in multiple colors
• 1 medium sized pink rhinestone

Instructions

1. Wrap a box in white wrapping paper.
2. Cut a 1-1/2 inch wide piece of the pink craft paper the length to
   wrap around the entire box plus 1 inch.
3. If the craft paper is not long enough to wrap around the entire
   box, tape two pieces together on the wrong side of the paper to achieve
   the desired length.
4. Using double-sided tape, tape the inside of the craft paper in even
   intervals at the edges. Apply to the box, centering the paper evenly
   on the top of the box and overlapping the ends on the bottom of the
   box.
   
5. Peel the backing off the foam heart stickers and attach 4 hearts
   in alternating colors on each side of the box. Change the direction
   of the hearts on the 3rd heart on the top of the box (as shown below)
   so the hearts will be facing the correct direction going down the
   other side of the box.
   
6. Wrap the raffia 4 times continuously around the box and tie on one
   the middle strings, leaving a few inches for tails. Don’t worry if
   ribbon crosses on the bottom of the box.
   
7. Feed each tail under the ribbons and tie a knot to cinch the ribbons
   together.
8. To make the bow, hold the ribbon about 6 inches from the end with
   your thumb and form a loop. Securing the loop with your thumb, form
   another loop on the opposite side of the first loop. Continue this
   motion, holding each new loop with your thumb, until you have 8 loops
   on each side.
9. Tie the bow to the package using the ribbon tails.
   
10. Separate the loops from each other and fluff the bow. Closely trim
    the ends of the knot and then trim the ribbon tails to the desired
    length.
11. Glue the pink rhinestone onto the middle of the bow.
    
    

Valentine’s Day Gifts Square Box

Difficulty – Easy

This design is best suited for a square box

Materials

• White wrapping paper
• Pink sponged craft or scrapbooking paper
• Multi-colored glossy raffia (white, pink and red)
• 12 foam heart stickers (3 medium white, 3 small white, 3 medium
  pink and 3 small pink)
• 1 medium sized pink rhinestone

Instructions

1. Wrap a box in white wrapping paper.
2. Cut a piece of the pink craft paper half of the width of the box
   and long enough to wrap around the entire box plus 1 inch. If the
   craft paper is not long enough to wrap around the entire box, tape
   two pieces together on the wrong side of the paper to achieve the
   desired length.
3. Using double-sided tape, tape the inside of the craft paper in even
   intervals at the edges. Apply to the top of the box, lining up the
   edges of the craft paper with the left edge of the box and overlapping
   the edges on the paper bottom of the box.
   
4. Peel the backing off the foam heart stickers and attach 3 medium
   white hearts centered on the pink side of the box and 3 medium pink
   hearts centered on the white side of the box.
5. Peel the backing off the small foam hearts stickers and place 3
   small white hearts centered on top of the pink hearts and 3 pink hearts
   centered on top of the white hearts.
   
6. Wrap the raffia 4 times continuously around the box and tie on one
   the middle strings, leaving a few inches for tails. Don’t worry if
   ribbon crosses on the bottom of the box.
   
7. Feed each tail under the ribbons and tie a knot to cinch the ribbons
   together.
8. To make the bow, hold the ribbon about 3 inches from the end with
   your thumb and form a loop. Securing the loop with your thumb, form
   another loop on the opposite side of the first loop. Continue this
   motion, holding each new loop with your thumb, until you have 8 loops
   on each side.
9. Tie the bow to the package using the ribbon tails making sure that
   the loops are vertical so they do not cover the foam hearts.
   
10. Separate the loops from each other and fluff the bow. Closely trim
    the ends of the knot and the ribbon tails from the bow.
11. Glue the pink rhinestone onto the middle of the bow.
    

Valentine’s Day Gifts Large Rectangular Box

Difficulty – Easy

This design is best suited for a rectangular box

Materials

• White wrapping paper
• Pink sponged craft or scrapbooking paper
• Multi-colored glossy raffia (white, pink and red)
• Foam heart stickers in multiple colors (3 large, 6 medium and 3
  small)
• 1 medium sized pink rhinestone

Instructions

1. 1. Wrap a box in white wrapping paper.
   2. Cut a piece of the pink craft paper 1/4 the size of the length of
      the box and long enough to wrap around the entire box plus 1 inch.
   3. If the craft paper is not long enough to wrap around the entire
      box, tape two pieces together on the wrong side of the paper to achieve
      the desired length.
   4. Using double-sided tape, tape the inside of the craft paper in even
      intervals at the edges. Apply to the box about 2 inches from the bottom
      edge of the box and overlapping the ends on the bottom of the box.
      
   5. Peel the backing off the 3 large foam heart stickers and attach
      in the configuration shown below. Attach 3 medium hearts of alternating
      colors center on top of the large hearts.
   6. Arrange the medium and small foam hearts stickers as show in the
      picture below and attach small hearts of alternating colors center
      on top of the medium hearts.

1. Wrap the raffia 4 times continuously around the box and tie on one
   the middle strings, leaving a few inches for tails. Don’t worry if
   ribbon crosses on the bottom of the box.
   
2. Feed the each tail under the ribbons and tie a knot to cinch the
   ribbons together.
   
3. To make the bow, hold the ribbon about 3 inches from the end with
   your thumb and form a loop. Securing the loop with your thumb, form
   another loop on the opposite side of the first loop. Continue this
   motion, holding each new loop with your thumb, until you have 10 loops
   on each side.
4. Tie the bow to the package using the ribbon tails.
   
5. Separate the loops from each other and fluff the bow. Closely trim
   the ends of the knot and the trim the ribbon tails to the desired
   length.
6. Glue the pink rhinestone onto the middle of the bow.